How would I setup a Linksys WRT54G2 Wireless G Router to a wii?

Like where would I plug in the ethernet cables?, and all that stuff.





Linksys WRT54G2 Wireless G Router is the newer version without the anntenneas showing.





Best answer to most informative answer.|||Wired, you'll need the Wii's USB Ethernet Adapter.





Wireless, if the WRT54G2 is anything like the old WRT54G, you can get into the router configuration by pointing your web browser to "http://192.168.1.1". Older versions of the router's default password was "admin" with no username to get in, check your manual to see if it's the same. In the router configuration, there should be a "Wireless" and "Wireless Security" tab. Security mode should be "WEP", enter a passphrase, and click Generate, the 4 Keys should populate. Copy the first key onto a piece of paper. Power up the Wii, get into the Network configuration, have it connect to your router and enter the key when prompted. That should be it.





I have an older WRT54G with third-party firmware so hopefully my instructions are similar enough to get by.|||The best setup is to connect wirelessly.





Make sure you use WEP Encryption instead of WPA if you plan on sharing it with a Nintendo DS too.